Product Specification About SELLEYS Epoxy Fix Super Steel AB Glue Araldite 2 Ton Copper, Steel, Aluminium, Brass, Pewter, (Metallic Grey) 35m


** Not Available To Sabah & Sarawak **
** Not Available To Sabah & Sarawak **
** Not Available To Sabah & Sarawak **

Size : 35mL Blister pack
Colour : Part A: White
Part B: Black (Both parts combined becomes grey)
Full Cure Time : Sets in approximately 90 minutes
Use : Interior, Exterior

Where can this product be used?
- Plastics industries
- Casting impregnating and potting system industries
- Electrical or electronic industries
- Mortar industries

What materials is this product suitable for?
- Metals and metal alloys
- Concrete and stone
- Rubber
- Ceramic
- Glassware
- China
- Porcelain
- Wood
- Leather
- Paper
- Textiles
- Fiberglass

How to Use ?
1. Surfaces to be repaired should be clean, dry and free from dirt or grease.
2. Unscrew caps of each tube and pierce with own cap to avoid contamination.
3. Dispense equal amount of resin and hardener (Part A and B) onto a clean disposable surface and mix thoroughly.
4. The mixture will remain usable for 30 minutes and will start to thicken.
5. Apply surfaces to be repaired and allow to harden.
6. To reseal, wipe nozzles clean and replace caps to original tube (colour coded), or hardening may occur in tube
nozzle.
7. For exterior applications, always ensure product is well dried at for least overnight (24 hours) before exposing to
environment